Fri Feb 18 02:06:43 2005
From: Jim Blair 

This may be of interest to you. Figuring out the Renix codex:


   From: "FOURNIL" <nfournil@wanadoo.fr>
Subject: First informations about Renix Diags


Hello

I have these informations :

the RX is a "open collector" the schematics for reading is :

 VREF --------[1kOhm]---------------< ECU
                           |
                           |
                           |
                          TTL

The speed is 10400 Bauds (16µS)

Frames begin with "FF" "00" and a double "FF" is only one FF (FF FF
=> FF)

There's a space between a byte, variable because of the CPU usage

The ECU send permanently its frames -no dialog for diag... more info
to come-

Frame format (partial, from memory of my contact):
<Type of ECU><Temp speed etc... on 2 bytes>...


Will give you MORE on the next week

Hope give you advice to begin work on :-) I'll do my interface this
weekend.